Blusoda water cooler (45 liters per hour) - Luxury design water cooler with carbonation

The Blusoda mains water cooler with a functional design, crafted from (coated) stainless steel, is an ideal compact water cooler for the office. This mains water cooler supplies cold, sparkling, and room temperature water. A version with both medium and full fizz is also available, or you can opt for a dosing system.

Optionally available base cabinets are available in the same colour scheme. The drip tray is optionally available with a drip tray that you can connect to a sewer drain or a drip tray collection container with overflow alarm.

If you want a model with a height-adjustable drip tray, this is also available as an option.

Request a no-obligation quote immediately

Prefer a customized offer? Request a quote today! 

[block=Specifications]

• Dimensions 318 x 499 x 470 mm (W x D x H)
• Weight: 29 to 35 kg
• Tap height: 329 mm
• Cold, sparkling & room temperature water
• Dosing system depending on version including
• Capacity 45 liters/hour
• Dry chill cooling system
  
• Adjustable thermostat
• Connection: 230 V - 50Hz
• Power: 300 W - 1,3 A

[block=Installation]

Professional installation with connection guarantee

Our mains water coolers are professionally installed by Habitat Solutions as standard. We not only deliver the system, but also ensure that the water cooler is connected correctly, hygienically, dry, and ready for use.

For installation, a suitable 3/4" washing machine tap connection and a grounded 230V socket must be present in the immediate vicinity of the water cooler, preferably within 1,5 meters. If the distance is greater, we will supply a longer connection hose, up to a maximum of 3 meters, at no extra cost.

During the installation, we connect the water cooler to the existing facilities, check the connection for leaks and correct operation, flush the system, and fit the water connections we make with suitable couplings and, where applicable, retaining clips.

With our connection guarantee, we vouch for the connection of the water cooler carried out by us to the existing and suitable water and power supply. Modifications to water pipes, structural work, defective existing facilities, insufficient accessibility, changes by third parties, or circumstances outside the system itself are not covered by this.

The ideal water pressure is approximately 3 bar. If the water pressure exceeds 5 bar or fluctuates significantly, we recommend a pressure reducing valve. The pressure reducer we supply optionally is set to 3 bar by default. In the exceptional case that the water pressure is too low or there is a risk of water hammer, additional provisions may be necessary, such as a booster pump or expansion vessel.

For a standard installation, we assume a total installation time of a maximum of 45 minutes, including on-site setup time. If the installation takes longer due to circumstances beyond our control, we will charge the extra time separately at the applicable hourly rate, per 15-minute increment.